Epson Artisan 810 Network Installation Guide - Page 18
Choose Security Settings, If you selected WEP as the security mode, continue with step 3.
View all Epson Artisan 810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Choose Security Settings 1. Select the security mode you want to use for the Ad Hoc wireless network. Note: If you don't want to enable security for your Ad Hoc network, select None, then press OK. 2. Do one of the following: ■ If you selected None as the security mode, continue with "Confirm Your Settings and Connect to the Network" on page 20. ■ If you selected WEP as the security mode, continue with step 3. 3. Create a WEP key for the Ad Hoc network. The WEP key can be in alphanumeric (ASCII) format (recommended) or hexadecimal format. Note: The number of characters in your WEP key depends on the type of security mode you choose and whether it's alphanumeric (ASCII) or hexadecimal: Security mode WEP-64 bit WEP-128 bit Alphanumeric (ASCII) 5 characters 13 characters Hexadecimal 10 characters 26 characters 4. Select Alphanumeric if your WEP key is ASCII, or select Hexadecimal if your WEP key is in hexadecimal format. 18 Wireless Network Installation