Epson C11C501061 Product Information Guide - Page 8

EPSON Stylus Photo 900 Paper Loading Guidelines You can load the following number of sheets of EPSON special media: Paper type Premium Bright White Paper Photo Quality Ink Jet Paper Photo Quality Ink Jet Cards Glossy Photo Paper or Photo Paper Panoramic Photo Paper Matte Paper Heavyweight ColorLife Photo Paper Double-Sided Matte Paper Premium Glossy Photo Paper Premium Semigloss Photo Paper Premium Luster Photo Paper Ink Jet Transparencies Iron-On Transfer Paper Photo Stickers Photo Quality Self Adhesive sheets Glossy Photo Greeting Cards Loading capacity 100 Sheets 65 sheets 30 cards with a support sheet beneath the stack 20 sheets 1 sheet with a support sheet beneath the sheet 20 sheets with a support sheet beneath the stack 1 sheet with a support sheet beneath the sheet 1 sheet ❏ Load all paper with the printable side up. It's usually whiter or brighter than the other side. ❏ If the paper has a cut corner, position it in the upper right corner as you load it in the sheet feeder. ❏ Check the paper package for additional instructions on using special papers. ❏ Load envelopes 10 at a time and set the paper thickness lever to the position. Loading Roll Paper You can load the following types and sizes of roll paper: Paper name EPSON Premium Glossy Photo Paper EPSON Premium Semigloss Photo Paper EPSON Premium Luster Photo Paper Roll sizes 4 inches × 26 feet 8.3 inches (A4) × 32.8 feet 4 inches × 26 feet 8.3 inches (A4) × 32.8 feet 1. Remove the tape and protective paper from the end of the roll. Then insert the holders into the roll of paper as shown. 2. Make sure the end of the paper is cut straight across, with 90° corners. If the end is cut diagonally, you may have problems feeding the paper. 3. If the paper curls at the end, fold a sheet of paper over the end and roll it backward to uncurl it. Avoid touching the printable surface of the roll paper. 4. Remove any paper that's in the sheet feeder at the top of the printer. Then remove the paper support, lower the output tray, and turn on the printer. 5. Make sure the paper thickness lever is set to the position. 5/03 EPSON Stylus Photo 900 - 7