Epson C11C694201 User Guide - Page 54

Error Messages Solution The image is too large. See your printer documentation. Press OK to clear the error. Check the data. The image is too complex. See your printer documentation. Error in data. Cannot print. Cannot recognize the device. See your printer documentation. Disconnect the device and check that it meets the PictureMate specifications. Cannot recognize the memory card. See your printer documentation. Make sure the memory card has been inserted correctly. If so, check to see if there is a problem with the card and try again. Cannot recognize CD contents. See your printer documentation. (PM 290 only) Remove the CD from the CD/DVD drive and check your CD is compatible with this printer. & See "CD/DVD drive (PM 290 Only)" on page 64. Save failed Make sure the memory card has been inserted correctly. Make sure the external device has been connected if you are saving to an external device. Check the file name. The maximum number of characters for a file name is 60. You cannot save the data if the character number exceeds this limit. The battery is empty. Connect the AC adapter. Error Messages Solution Battery overheating. Turn the PictureMate off, and wait until the battery temperature decreases. There is a problem with the Turn the PictureMate off. Replace the battery voltage. battery with a new one. Printer Power Problems LCD screen is dark or off ❏ If no buttons are pressed for three minutes, the LCD screen goes dark to save energy. After another 10 minutes, the LCD screen turns off automatically. Press any button (except d On) to return the screen to its previous state. ❏ Press d On to make sure that PictureMate is on. ❏ Turn off PictureMate and make sure that the power cord is securely plugged in. ❏ Make sure that your outlet works and is not controlled by a wall switch or timer. 54 Troubleshooting PictureMate PM 260 / PM 290