Epson C11C694201 User Guide - Page 57
Problems With Paper Feeding, Colors in your photo are wrong or missing.
![]() |
UPC - 010343866225
View all Epson C11C694201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
English ❏ The print head nozzles may need cleaning; see "Checking and Cleaning the Print Head Nozzles" on page 50 for instructions. ❏ The photo cartridge may be old or low on ink. To replace the photo cartridge, see "Replacing the PicturePack" on page 41. ❏ Make sure your paper is not damaged, old, dirty, or loaded face down. If it is, reload a new stack of paper with the glossy side up. Colors in your photo are wrong or missing. ❏ Make sure the Color Effect setting is set to None for color photos. ❏ The print head nozzles may need cleaning; see "Checking and Cleaning the Print Head Nozzles" on page 50. ❏ The photo cartridge may be old or low on ink. To replace the cartridge, see "Replacing the PicturePack" on page 41. Problems With Paper Feeding Paper does not eject fully or is wrinkled. If it is wrinkled when it ejects, the paper may be damp or too thin. Paper does not feed correctly or jams in the printer. ❏ Make sure the top cover is open, and is not leaning on the handle. The handle should be back of PictureMate. Make sure the handle is not resting on the paper. See "Preparing to Print" on page 13. ❏ If paper does not feed, remove it from paper feeder, reload it in the center, then slide both edge guides against the paper (but not too tightly). ❏ If multiple pages feed at once, remove the paper from the paper feeder, separate the sheets, and carefully reload it. ❏ If paper jams, remove the paper, then press OK to clear the jam. PictureMate PM 260 / PM 290 Troubleshooting 57
![](/manual_guide/products/epson-c11c694201-user-guide-b41ac87/57.png)