Epson C414014 User Manual - Page 10

Connecting Cables, Width note

Get Epson C414014 - TM L90 Color Thermal Line Printer PDF manuals and user guides View all Epson C414014 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

English Width note: When you want to set the roll paper width from 61 mm to 70 mm, break off by hand the two tabs of the spacer shown in tabs the illustration. (You can still also use widths from 38 mm to 60 mm with the spacer with the tabs broken off.) 4. Insert the screw included with the spacer into the hole indicated below and tighten it. (Even if you can see two holes, this is the only one to put the screw in.) Connecting Cables To connect cables, first remove the bottom of the cover as shown in the illustration. hole for screw To place cables, first break off by hand any of the three portions indicated by circles in the illustration (the other portion is on the right). Then put the cables through the holes and replace the bottom of the cover. 8 TM-L90 User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
8
TM-L90 User’s Manual
English
Width note:
When you want to set the roll
paper width from 61 mm to
70 mm, break off by hand the
two tabs of the spacer shown in
the illustration. (You can still
also use widths from 38 mm to
60 mm with the spacer with the
tabs broken off.)
4.
Insert the screw included
with the spacer into the hole
indicated below and tighten it. (Even if you can see two holes, this
is the only one to put the screw in.)
Connecting Cables
To connect cables, first remove the bottom
of the cover as shown in the illustration.
To place cables, first break off by hand any
of the three portions indicated by circles in
the illustration (the other portion is on the
right). Then put the cables through the
holes and replace the bottom of the cover.
tabs
hole for screw