Epson C414014 User Manual - Page 6
TM-L90 User's Manual, Usage Precautions for the Power Unit
View all Epson C414014 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
English ❏ Control panel label used for horizontal installation ❏ Paper roll spacer ❏ Paper exit guide for horizontal installation ❏ Screw for installation of the paper roll spacer ❏ Hexagonal lock screws (2 pieces) (only for the serial interface) ❏ AC adapter (*) ❏ Usage Precautions for the Power Unit (*) (*) May not be included with the printer Installing Horizontally or Vertically You can install the printer horizontally (with the paper exit on top) or vertically (with the paper exit at the front) either on a flat surface or by hanging it on a wall (using the optional hanging bracket set, WH-10). Both the horizontal and vertical positions are shown below. When you install the printer horizontally, attach the control panel label and position the roll paper near end sensor as shown in the illustrations. To move the sensor, follow these steps. 1. Loosen the screw with a coin or similar tool and turn it at least 3 or 4 times. 2. Push the lever gently as far as it will go. 3. Turn the tab (in the direction of the arrow in the illustration) while pushing the lever until it clicks into place in hole A. 4. Secure the screw and make sure the lever moves smoothly. tab Note: To hang the printer on the wall, see the screw Wall Hanging Bracket Set Installation Manual provided with the WH-10 for instructions. A 4 TM-L90 User's Manual