Epson CX5400 Start Here Card - Page 6

continued 9 Continue following the instructions on the screen to install the rest of your software, including ABBYY® FineReader® Sprint and ArcSoft® PhotoImpression.TM Note: It will take several minutes to install the remaining software. Don't cancel the installation. 10 At the end of the installation, click Exit. 11 When you see the Product Registration screen, register your Stylus CX as instructed. At the last screen, click Done or close your browser. 12 Remove the CD-ROM. Now you're ready to copy, scan, and print. See the Quick Reference Guide or your on-screen EPSON Information Center for instructions. Macintosh 1 Remove the sticker from the USB port on the Stylus CX. 2 Connect the flat end of the cable to any USB port on your Macintosh, then connect the square end of the USB cable to the USB port on the Stylus CX. 3 Insert the EPSON Stylus CX5400 CD-ROM in your CD-ROM or DVD drive. 4 Double-click the EPSON CD-ROM icon. 5 If you are using Mac OS X, double-click the Mac OS X folder, then double-click the EPSON icon. If you are using Mac OS 8.6 to 9.x, double-click the EPSON icon. 6 When you see the message about disabling your antivirus software, click Continue. 7 When you see the license agreement, click Agree to continue. 8 At the Software Installation screen, click Install. Enter your Administrator name and password if necessary. Note: If you're installing on Macintosh OS 8.6 to 9.x, you may see a prompt to update your Carbon Library. After the CarbonLib installation is complete and you've restarted your system, double-click the EPSON icon, then click Install to continue the installation. 9 Follow the on-screen instructions to install the software, including ABBYY® FineReader® Sprint and ArcSoft® PhotoImpression.TM 10 At the end of the installation, click Exit. 11 When you see the Product Registration screen, register your Stylus CX as instructed. At the last screen, click Quit or close your browser. 12 Remove the CD-ROM and restart your Macintosh to fully activate the Stylus CX. Follow the instructions in the next column to add the Stylus CX to the Print Center (for OS X). If you're using OS 8.6 to 9.x, follow the instructions in the next column to select the Stylus CX in the Chooser.