Epson CX5400 Start Here Card - Page 7
Any Problems? - stylus driver
UPC - 010343848412
View all Epson CX5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Adding the Stylus CX to Print Center for Mac OS X 1 Open the OS X Applications folder, then open the Utilities folder and double-click Print Center. If you see this screen, click Add. 2 If the Stylus CX5400 already appears in the printer list, click it, then click Add. If the Stylus CX5400 doesn't appear in the printer list, make sure it is connected and turned on. Then click Add. 3 Select EPSON USB at the top of the next screen. 4 Click Stylus CX5400. The Page Setup pull-down menu at the bottom of the screen becomes active. 5 Open the Page Setup pull-down menu and select All. 6 Click the Add button. You see the Printer List again with the Borderless feature available. 7 Close Print Center. You're ready to copy, scan, and print. 8 Now start up your Macintosh in OS 9.x. Follow the instructions in the previous column to install the OS 9.x drivers and optional software for Macintosh Classic programs. Selecting the Stylus CX in the Chooser for Mac OS 8.6 to 9.x 1 Open the Chooser from the Apple menu. Select CX5400, then select your USB port and turn on background printing. 2 Close the Chooser. You're ready to copy, scan, and print. Any Problems? If the red Error light is on, check the message on the Stylus CX. Try turning the Stylus CX off and then back on to clear the error. If your problem is listed here, try these suggestions. For more information, see your software Help, Quick Reference Guide, or your on-screen EPSON Information Center. The Found New Hardware Wizard appears on your screen. Click Cancel and follow the steps in section 7. Disconnect the Stylus CX before installing the software. You see an error message when you try to print or scan. Make sure your Stylus CX is connected to your computer, plugged into a power source, and turned on. The Stylus CX doesn't work. Make sure you removed the tape from the ink cartridge holder, as described in section 1. Turn the Stylus CX off and then on again. Slide the transportation lock under the lid to unlock the scanner. See section 2. Make sure the ink cartridges are pushed all the way down. Make sure you're using the USB cable that came with your Stylus CX. Try connecting it to a different USB port on your computer. Make sure your EPSON Stylus CX5400 software is installed correctly.