Epson CX7800 Basics - Page 51

Notices Important Safety Instructions Before using your Epson Stylus CX7800, read and follow these safety instructions: ■ Be sure to follow all warnings and instructions marked on the Epson Stylus CX7800. ■ Use only the type of power source indicated on the Epson Stylus CX7800 label. ■ Use only the power cord that comes with the Epson Stylus CX7800. Use of another cord may cause fires or shock. Do not use the cord with any other equipment. ■ Place the Epson Stylus CX7800 near a wall outlet where the plug can be easily unplugged. Placez l'imprimante près d'une prise de courant où la fiche peut être débranchée facilement. ■ Do not let the power cord become damaged or frayed. ■ If you use an extension cord with the Epson Stylus CX7800, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere rating. ■ Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust. ■ Leave enough room around the Epson Stylus CX7800 for sufficient ventilation. Do not block or cover openings in the Epson Stylus CX7800 case or insert objects through the slots. ■ Make sure the back of the Epson Stylus CX7800 is at least 3.9 inches (10 cm) away from the wall. ■ Do not place the Epson Stylus CX7800 near a radiator or heating vent or in direct sunlight. ■ Place the Epson Stylus CX7800 on a flat, stable surface that extends beyond its base in all directions. It will not operate properly if it is tilted or at an angle. ■ Do not open the scanner section while the Epson Stylus CX7800 is copying, printing, or scanning. ■ Do not spill liquid on the Epson Stylus CX7800. ■ Except as specifically explained in your documentation, do not attempt to service the Epson Stylus CX7800 yourself. Notices 51