Epson EMP S5 User Guide - Page 19

Security Functions f Setting Password Protect Use the following procedure to set Password Protect. Procedure A Hold down the [Freeze] button for about five seconds. The password protect setting menu is displayed. Remote control q • If Password Protect is already activated, you must enter the password. If the password is entered correctly, the password protect setting menu is displayed. s "Entering the Password" p.20 • When the password is set, stick the password protect sticker in a visible position on the projector as a further theft deterrent. B Turn on "Power On Protect". (1) Select "Power On Protect", and then press the [Enter] button. (2) Select "On", and then press the [Enter] button. (3) Press the [Esc] button. 19 C Turn on "User's Logo Protect"*. (1) Select "User's Logo Protect", and then press the [Enter] button. (2) Select "On", and then press the [Enter] button. (3) Press the [Esc] button. D Turn on "Network Protect". (1) Select "Network Protect", and then press the [Enter] button. (2) Select "On", and then press the [Enter] button. (3) Press the [Esc] button. E Set the password. (1) Select "Password", and then press the [Enter] button. (2) When the message "Change the password?" is displayed, select "Yes" and then press the [Enter] button. The default setting for the password is "0000". Change this to your own desired password. If you select "No", the screen shown in step 1 is displayed again. (3) Enter a four digit number using the numeric buttons. The number entered is displayed as "* * * *". When you enter the fourth digit, the confirmation screen is displayed. Remote control Numeric buttons (4) Re-enter the password. The message "Password accepted." is displayed. If you enter the password incorrectly, a message is displayed prompting you to re-enter the password.