Epson EMP S5 User Guide - Page 67

ESC/VP21 Commands Command List When the power ON command is transmitted to the projector, the power turns on and it enters warm-up mode. When the projector's power has turned on, a colon ":" (3Ah) is returned. When a command is input, the projector executes the command and returns a ":", and then accepts the next command. If the command being processed terminates due to a problem, an error message is output and a ":" is returned. Item Power ON/OFF ON OFF Signal selection Video S-Video A/V Mute ON/OFF ON OFF A/V Mute selection Black Blue Logo Item Signal selection Computer (Auto) Computer Component Video Command PWR ON PWR OFF SOURCE 41 SOURCE 42 MUTE ON MUTE OFF MSEL 00 MSEL 01 MSEL 02 Command Computer1 Computer2 Port Port SOURCE 1F SOURCE 2F SOURCE 11 SOURCE 21 SOURCE 14 SOURCE 24 * Add a Carriage Return (CR) code (0Dh) to the end of each command and transmit. 67 Cable Layouts f Serial connection (EMP-83/822 Only) • Connector shape • Projector input connector : D-Sub 9-pin (male) : RS-232C At the projector GND 5 RD 2 TD 3 DTR 4 DSR 6 (PC serial cable) At the computer 5 GND 3 TD 2 RD 6 DSR 4 DTR Signal Function GND Signal wire ground TD Transmit data RD Receive data DSR Data set ready DTR Data terminal ready