Epson ET-2800 Users Guide - Page 199

Paper Feeding Problems Paper Jam Problems Inside the Product Paper Ejection Problems Parent topic: Solving Problems Paper Feeding Problems If you have problems feeding paper, try these solutions: • Place the product on a flat surface. • If paper does not feed for printing, remove it. Then reload it in the middle of the rear paper feed. Slide the edge guides against the edge of the paper, making sure that the paper stack is not above the arrow mark on the edge guides. • If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it. • If multiple pages feed at once during manual 2-sided printing, remove any paper from the product before reloading paper. • If paper jams when you print on both sides of the paper, try loading fewer sheets. • Make sure your paper meets the specifications for your product. • Make sure the paper size and paper type settings on the control panel are correct. • For best results, follow these guidelines: • Use new, smooth, high-quality paper that is not curled, creased, old, too thin, or too thick. • Load paper in the rear paper feed printable side up. • Follow any special loading instructions that came with the paper. Parent topic: Solving Paper Problems Related references Paper Loading Capacity Paper Specifications Paper Jam Problems Inside the Product Related tasks Loading Paper in the Rear Paper Feeder Cleaning Your Product 199