Epson Moverio BT-45CS Users Guide - BO-IC400N Intelligent Controller - Page 17
Charging
View all Epson Moverio BT-45CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Charging Charge the battery by connecting the included USB cable to a commercially available USB power adapter. Charging takes approximately 3 hours under the following conditions. • Turn off the device to charge • Connect to the USB Type-C connector (for headset connec- tions) to charge • Use a USB power adapter with 5V/2A output A Connect the device to a USB power adapter. Connect the device to a USB power adapter using the included USB cable. Charging capacity varies depending on the connector to be connected. • USB Type-C connector (for headset connections): Up to 1.5 A (depending on the connected power adapter) • USB Type-C connector (with cover): 0.5 A maximum B Plug in the USB power adapter. The LED indicator turns on. If the battery is completely dead, the LED indicator does not turn on until a while after you start charging. Charge for at least 30 minutes, and then reconnect the USB cable. You can reduce the charging time by using a commercially available USB Type-C cable and a USB Type-C power adapter that supports PD (Power Delivery). 17