Epson Moverio BT-45CS Users Guide - BO-IC400N Intelligent Controller - Page 23
Inserting an SD Card
View all Epson Moverio BT-45CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Inserting an SD Card The following SD cards are supported by the device. • microSD cards (2 GB maximum) • microSDHC cards (32 GB maximum) • microSDXC cards (2 TB maximum) * An SD card is not included with this product. A Insert the SD card slot pin into the slot pin insertion hole to open the microSD card slot cover. You may not be able to use SD cards formatted on other devices. Follow the steps below to format the card. Note that any data on the SD card will be deleted when you format the card. A Tap [ ] on the APPS list screen. B Select [Storage], and then select [SD card] from [Por- table storage]. C Tap [ ] at the top right of the [SD card] screen, and then select [Storage settings]. D Select [Format] or [Format as internal] to format the SD card. B Insert the microSD card. C Close the microSD card slot cover. 23