Epson Moverio BT-45CS Users Guide - BO-IC400N Intelligent Controller - Page 36
Cannot operate the device, Cannot connect to the network, Link Pro app.
![]() |
View all Epson Moverio BT-45CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
• The 2D or 3D display may not be suitable for the images displayed. Switch between 2D or 3D in the pre-installed "MOVERIO Link Pro" app. Cannot operate the device • When you hold down the Switch key, the key lock feature activates and you cannot operate the device. Hold down the Switch key again to release the key lock. • The device may have entered sleep mode. Press the Power button briefly to wake the product from Sleep mode. Cannot connect to the network • Check that the wireless LAN (Wi-Fi) environment where you are using the product can be accessed. • Check that the product's network settings are correct. Contact your network administrator for more details. 36 Troubleshooting
![](/manual_guide/products/epson-moverio-bt45c-users-guide-boic400n-intelligent-controller-69e3563/36.png)
36
Troubleshooting
•
The 2D or 3D display may not be suitable for the images
displayed.
Switch between 2D or 3D in the pre-installed "MOVERIO
Link Pro" app.
Cannot operate the device
•
When you hold down the Switch key, the key lock feature
activates and you cannot operate the device. Hold down
the Switch key again to release the key lock.
•
The device may have entered sleep mode. Press the Power
button briefly to wake the product from Sleep mode.
Cannot connect to the network
•
Check that the wireless LAN (Wi-Fi) environment where
you are using the product can be accessed.
•
Check that the product's network settings are correct.
Contact your network administrator for more details.