Epson MovieMate 85HD User's Guide - Page 38

Playing Projector Audio Through an External Audio System

Get Epson MovieMate 85HD PDF manuals and user guides View all Epson MovieMate 85HD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Playing Projector Audio Through an External Audio System You can connect the projector to an amplifier, a 5.1 Stereo Surround Sound System, or a digital audio recorder. To output sound from the projector, the external equipment needs to have a digital coaxial (S/PDIF) audio input port. You will also need a digital coaxial cable, which may be provided with your external equipment, or may be purchased from an electronics store. 1. Make sure the equipment is turned off, then connect the cable as shown: Digital coaxial cable 2. Turn on your audio equipment and play your movie, music, or other presentation with sound from your projector. 3. You may need to change the Digital Output setting in the Audio Setup Page. Select Stream if you are connecting a DTS/Dolby Digital Decoder or PCM if you are connecting to equipment that is only compliant with linear PCM. For more information, see page 51. You can use any of your projector's audio controls, as described on pages 27 and 31. 38 Using Epson MovieMate with Other Equipment

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
38
Using Epson MovieMate with Other Equipment
Playing Projector Audio Through an External
Audio System
You can connect the projector to an amplifier, a 5.1 Stereo Surround Sound System, or a
digital audio recorder. To output sound from the projector, the external equipment needs to
have a digital coaxial (S/PDIF) audio input port.
You will also need a digital coaxial cable, which may be provided with your external
equipment, or may be purchased from an electronics store.
1.
Make sure the equipment is turned off, then connect the cable as shown:
2.
Turn on your audio equipment and play your movie, music, or other presentation with
sound from your projector.
3.
You may need to change the
Digital Output
setting in the Audio Setup Page. Select
Stream
if you are connecting a DTS/Dolby Digital Decoder or
PCM
if you are
connecting to equipment that is only compliant with linear PCM. For more information,
see page 51.
You can use any of your projector’s audio controls, as described on pages 27 and 31.
Digital coaxial cable