Epson P20000 Quick Reference - Page 25

until it clicks into place. Don't force it in., Close the ink cover.

Get Epson P20000 PDF manuals and user guides View all Epson P20000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

24 | Replacing ink cartridges 4. Make sure the replacement cartridge is the correct color and remove it from its package. Gently shake the cartridge for about 10 seconds before installing it, but be careful not to touch the chip on the cartridge. 5. Hold the cartridge with the arrow pointing toward the printer. Then insert the cartridge into the slot until it clicks into place. Don't force it in. Caution: Do not remove and re-insert cartridges more often than necessary. Doing so can compromise the needle valve seal and allow air to enter the ink tubes, causing nozzle damage. Note: If the ink cartridges are not used on a frequent basis, it is recommended that you remove the cartridges every 3 months, shake them for 10 seconds, and re-insert them. 6. Close the ink cover. Wait for the printer to check the ink cartridges and charge the ink delivery system, if necessary. Caution: Never turn off the printer while ink is charging or you'll waste ink.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
24
|
Replacing ink cartridges
4.
Make sure the replacement cartridge is the correct color and remove it from its package. Gently shake
the cartridge for about 10 seconds before installing it, but be careful not to touch the chip on the
cartridge.
5.
Hold the cartridge with the arrow pointing toward the printer. Then insert the cartridge into the slot
until it clicks into place. Don’t force it in.
Caution:
Do not remove and re-insert cartridges more often than necessary. Doing so can compromise the
needle valve seal and allow air to enter the ink tubes, causing nozzle damage.
Note:
If the ink cartridges are not used on a frequent basis, it is recommended that you remove the
cartridges every 3 months, shake them for 10 seconds, and re-insert them.
6.
Close the ink cover.
Wait for the printer to check the ink cartridges and charge the ink delivery system, if necessary.
Caution:
Never turn off the printer while ink is charging or you’ll waste ink.