Epson PictureMate Product Information Guide - Page 2

Loading Paper, Printing, Environmental, Safety Approvals, Photo Cartridge

Page 2 highlights

PictureMate Power consumption Approx. 13 W Approx. 4 W in standby mode Environmental Temperature Operation 50 to 95 °F (10 to 35 °C) Storage* −4 to 104 °F (−20 to 40 °C) 1 month at 104 °F (40 °C) Transit* -4 to 140 °F (-20 to 60 °C) 120 hours at 140 °F (60 °C) Humidity (without condensation) Operation 20 to 80% RH Storage* 5 to 85% RH * Stored in shipping container Safety Approvals Safety standards EMI UL 1950, CSA C22.2 No. 950 FCC part 15 subpart B class B CSA C108.8 Class B Photo Cartridge Colors Cartridge life Storage temperature Transit temperature Freezing temperature* Dimensions Black, Cyan, Magenta, Yellow, Red, and Blue 2 years from production date (if unopened) (within 6 months after opening package, at 77 °F [25 °C]) −4 to 104 °F (−20 to 40 °C) 1 month at 104 °F (40 °C) −22 to 140 °F (−30 to 60 °C) 1 month at 104 °F (40 °C) 120 hours at 140 °F (60 °C) 12.2 °F (−11 °C) 7.7 × 3.6 × 0.7 inches (W × D × H) 196 × 91.5 × 18.8 mm (W × D × H) * Ink thaws and is usable after approximately 3 hours at 77 °F (25 °C). Caution: To ensure good results, use a genuine PictureMate Photo Cartridge and do not refill it. PictureMate calculates the amount of ink remaining using an IC chip on the photo cartridge, so even if the cartridge is refilled, the IC chip will report that it is empty. Do not use a photo cartridge if the date on the cartridge has expired. Do not leave PictureMate, a PictureMate Photo Cartridge, or PictureMate with a PictureMate Photo Cartridge installed exposed to heat or direct sunlight. Loading Paper Follow these steps to load PictureMate Photo Paper. Caution: Don't load plain paper; this may damage PictureMate. 1. Move the handle to the back and down. Move handle to the back and down Open output tray Note: Keep the handle to the back and all the way down, to allow paper to feed through. 2. Open the output tray. 3. Open the paper support. Slide the top part of the paper support up gently until it clicks into place. Load glossy side up Open and slide up paper support 4. Place your paper against the right edge, glossy side up. Note: Make sure paper is glossy side up to prevent smearing. 5. Slide the edge guide against the paper. Make sure it is snug, but not so tight that paper is bent. Edge guide Printing PictureMate can print photos from these devices: ❏ Your digital camera's memory card. ❏ A data storage device, such as a CD, Zip disk, or flash memory (thumb) drive. See the Using PictureMate Without a Computer book for details. ❏ A PictBridge- or USBDP-enabled digital camera. See the Using PictureMate Without a Computer book for details. 2 - PictureMate 4/04

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

PictureMate
2 -
PictureMate
4/04
Power
consumption
Approx. 13 W
Approx. 4 W in standby mode
Environmental
Temperature
Operation
50 to 95 °F (10 to 35 °C)
Storage*
4 to 104 °F (
20 to 40 °C)
1 month at 104 °F (40 °C)
Transit*
–4 to 140 °F (–20 to 60 °C)
120 hours at 140 °F (60 °C)
Humidity (without condensation)
Operation
20 to 80% RH
Storage*
5 to 85% RH
*
Stored in shipping container
Safety Approvals
Safety standards
UL 1950, CSA C22.2 No. 950
EMI
FCC part 15 subpart B class B
CSA C108.8 Class B
Photo Cartridge
*
Ink thaws and is usable after approximately 3 hours at
77 °F (25 °C).
Caution:
To ensure good results, use a genuine PictureMate Photo
Cartridge and do not refill it. PictureMate calculates the amount of ink
remaining using an IC chip on the photo cartridge, so even if the
cartridge is refilled, the IC chip will report that it is empty.
Do not use a photo cartridge if the date on the cartridge has expired.
Do not leave PictureMate, a PictureMate Photo Cartridge, or
PictureMate with a PictureMate Photo Cartridge installed exposed to
heat or direct sunlight.
Loading Paper
Follow these steps to load PictureMate Photo Paper.
Caution:
Don’t load plain paper; this may damage PictureMate.
1.
Move the handle to the back and down.
Note:
Keep the handle to the back and all the way down, to
allow paper to feed through.
2.
Open the output tray.
3.
Open the paper support. Slide the top part of the paper
support up gently until it clicks into place.
4.
Place your paper against the right edge, glossy side up.
Note:
Make sure paper is glossy side up to prevent smearing.
5.
Slide the edge guide against the paper. Make sure it is snug,
but not so tight that paper is bent.
Printing
PictureMate can print photos from these devices:
Your digital camera’s memory card.
A data storage device, such as a CD, Zip disk, or flash
memory (thumb) drive. See the
Using PictureMate Without
a Computer
book for details.
A PictBridge- or USBDP-enabled digital camera. See the
Using PictureMate Without a Computer
book for details.
Colors
Black, Cyan, Magenta, Yellow, Red, and Blue
Cartridge life
2 years from production date (if unopened)
(within 6 months after opening package, at
77 °F [25 °C])
Storage temperature
4 to 104 °F (
20 to 40 °C)
1 month at 104 °F (40 °C)
Transit temperature
22 to 140 °F (
30 to 60 °C)
1 month at 104 °F (40 °C)
120 hours at 140 °F (60 °C)
Freezing temperature*
12.2 °F (
11 °C)
Dimensions
7.7
×
3.6
×
0.7 inches (W
×
D
×
H)
196
×
91.5
×
18.8 mm (W
×
D
×
H)
Open output tray
Move handle
to the back
and down
Load
glossy side
up
Open and
slide up
paper support
Edge
guide