Epson PowerLite 1940W User Manual - Page 67
Controlling a Networked Projector Using Crestron RoomView, Parent topic, Enter, Configuration
View all Epson PowerLite 1940W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
7. Turn off the projector, then turn it on again to enable the setting. Parent topic: Crestron RoomView Support Controlling a Networked Projector Using Crestron RoomView Once you have set up your projector to use Crestron RoomView, you can control and monitor projection using a compatible web browser. 1. Start your web browser on a computer connected to the network. 2. Type the projector's IP address into the browser's address box and press the computer's Enter key. You see this screen: 3. Select the input source that you want to control in the Sources List box. You can scroll through available sources using the up and down arrows in the box. 4. To control projection remotely, click the on-screen buttons that correspond to the projector's remote control buttons. You can scroll through button options at the bottom of the screen. Note: These on-screen buttons do not directly correspond to the projector's remote control buttons: • OK acts as the Enter button • Menu displays the Configuration menu 5. To view information about the projector, click the Info tab. 67