Epson PowerLite Home Cinema 1040 User Manual - Page 38
Connecting to an S-Video Video Source, Connecting to Video Sources
View all Epson PowerLite Home Cinema 1040 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
PowerLite Home Cinema 1040 3. Tighten the screws on the VGA connector. If your image colors appear incorrect, you may need to change the Input Signal setting in the projector's Signal menu. Note: If you connected a game console, it may take a few seconds for your image to appear when you switch to the game console's input source. To reduce the potential lag in response time to game commands, set your game console's output format to a progressive signal of 480p, 720p, or higher. See your game console documentation for instructions. Parent topic: Connecting to Video Sources Related references Optional Equipment and Replacement Parts Input Signal Settings - Signal Menu Related tasks Connecting to a Video Source for Sound Connecting to an S-Video Video Source If your video source has an S-Video port, you can connect it to the projector using an optional S-Video cable. 1. Connect the S-Video cable to your video source's S-Video output port. 38