Epson PowerLite Home Cinema 8700 UB User's Guide - Page 21

Installing Batteries in the Remote Control, Turning the Projector On and Off, Turning On the Projector

Get Epson PowerLite Home Cinema 8700 UB - PowerLite Home Cinema 8700UB Projector PDF manuals and user guides View all Epson PowerLite Home Cinema 8700 UB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Installing Batteries in the Remote Control The remote control uses two AA batteries. WARNING: Keep batteries away from children. If a battery is swallowed, contact your doctor immediately. 1. Release the tab and lift open the cover. 2. Insert two new AA batteries as shown. 3. Insert the tab on the cover and press it down until it clicks into place. Aim the remote control at the screen, or at the front or back of the projector. Make sure you are within 30 feet of the projector. If you suspect the batteries are weak, press the illumination button. If the buttons do not glow, replace the batteries. Turning the Projector On and Off Turning On the Projector 1. Remove the lens cap. 2. Turn on any connected equipment you plan to use. 3. Turn on the main power switch on the back of the projector. ON Setting Up the Projector 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Setting Up the Projector
21
Installing Batteries in the Remote Control
The remote control uses two AA batteries.
WARNING:
Keep batteries away from children. If a battery is swallowed, contact your doctor
immediately.
1.
Release the tab and lift open the cover.
2.
Insert two new AA batteries as shown.
3.
Insert the tab on the cover and press it down until it
clicks into place.
Aim the remote control at the screen, or at the front or
back of the projector. Make sure you are within 30 feet
of the projector.
If you suspect the batteries are weak, press the
illumination button. If the buttons do not
glow, replace the batteries.
Turning the Projector On and Off
Turning On the Projector
1.
Remove the lens cap.
2.
Turn on any connected equipment you plan to use.
3.
Turn on the main power switch on the back of the projector.
ON