Epson R1900 Product Information Guide - Page 10

Epson Stylus Photo R1900 Series If it is crooked or the front edge is visible, you may receive a paper jam error when you print. To avoid this, press the M roll paper button for three seconds to back the paper out. Press the I paper button to clear the paper out error, and load the roll paper or canvas media again. 10. For roll paper, turn the knobs on the roll paper holders backward to remove excess slack. (Leave 2 to 3 inches of slack for canvas media.) 11. Close the printer cover and do not open it during printing. Remove Prints on Roll Paper or Canvas Media 1. Press the M roll paper button to feed the roll paper forward. 2. Cut off your printed photos straight across the paper at the cutting guideline. Caution: Do not pull on the paper as you cut it to avoid damaging your printout. Also do not cut the paper too close to the printer to avoid paper feeding problems. 3. To continue printing on roll paper, press the M roll paper button again to return the paper to printing position. 4. Turn the knobs on the roll paper holder backward to remove excess slack. (Leave two to three inches of slack for canvas media.) 5. After cutting off your printed photos, you can remove the roll paper or canvas media from the printer. Press the M roll paper button for three seconds to feed the paper backwards and out of the printer. If it does not feed all the way out, press the M roll paper button again. 6. Turn the knobs on the roll paper holder backward to roll up the paper, then remove the paper and holders from the printer. 7. Press the I paper button to stop the I paper light from flashing. Store the unused roll paper or canvas media in its original package away from high temperatures, humidity, and direct sunlight. Loading a CD or DVD You can use your Epson Stylus® Photo R1900 Series to print a design directly onto ink jet-printable CDs or DVDs to create a custom label. You can print on CDs or DVDs using the Epson Print CD computer software that came with your printer. See the onscreen Reference Guide for instructions. Before you load a CD or DVD, be sure to clean the rollers inside the printer. Note: If you're using discs where the printable area extends to within 0.16 inch (4 mm) of the edge of the center hole, you may need to adjust the Inner Diameter setting in the File menu of the Epson Print CD software. See the on-screen Reference Guide for instructions. Cleaning the Roller Before you print on a CD or DVD, it's a good idea to clean the rollers inside the printer by feeding several sheets of plain paper through it. 1. Turn on the printer. 2. Open the paper support and output tray. 3. Load several sheets of plain paper in the sheet feeder. 4. Press the I paper button to feed the paper through the printer. 5. Press the I paper button again to eject the paper. 6. Feed several sheets of paper in this way to completely clean the rollers. Inserting a CD or DVD You can print on any compatible, ink jet-printable CDs or DVDs. 1. First burn files, music, or video onto your CD/DVD before printing on it to prevent errors. 2. Turn on the printer. 3. Remove any paper loaded in the sheet feeder and remove the single sheet guide, if it is installed. Also close the paper support. 10 - Epson Stylus Photo R1900 Series 11/07