Epson R1900 Product Information Guide - Page 17

Epson Stylus Photo R1900 Series 4. Follow the on-screen instructions to print an alignment sheet. 5. Check the alignment pattern that prints and compare it to the alignment criteria on your screen. 6. If necessary, enter the number of the best pattern and click Finish. Note: If no patterns are aligned, choose the closest one and click Realignment. Then print another alignment sheet and check it. 7. When you're done, click Finish. Transporting the Printer If you need to ship your printer or transport it a long distance, prepare it for transportation as follows: 1. Turn off the printer. 2. Unplug all the connected cables. 3. Remove all the paper and paper loading accessories. 4. Close the paper support and output tray. 5. Lift up the printer cover and check that the ink cartridge holder is all the way to the right (the home position). If necessary, plug in and turn on the printer, then turn it off again using the P power button. 6. Fasten the ink cartridge holder to the case using tape. Leave the ink cartridges installed to avoid damaging the printer. Cleaning the Printer To keep the R1900 Series working at its best, you should clean it several times a year. Caution: Do not use a hard brush, benzine, alcohol, or paint thinner to clean the printer or you may damage it. Do not use oil or other lubricants inside the printer or let water get inside it. 1. Turn off the printer. 2. Unplug the power cable. 3. Disconnect the USB cable. 4. Remove all the paper. 5. Clean all the paper feeders using a soft brush. 6. Close the paper support, printer cover, CD/DVD tray guide cover, and output tray, then clean the outer case with a soft cloth dampened with mild detergent. 7. Plug the power cable back into the electrical outlet and turn on the printer. 8. Load several sheets of plain paper in the sheet feeder and clean the rollers inside the printer. 7. Close the printer cover, then fasten the output tray to the case using tape. 8. Pack the printer and its accessories in its original box or one of a similar size using protective material to keep it from moving inside the box. 9. Keep the printer level during transportation to prevent damage. 10. After unpacking the printer, remove the tape securing the ink cartridge holder and output tray. If print quality has declined when you print again in a new location, clean and align the print head. 11/07 Epson Stylus Photo R1900 Series - 17