Epson R1900 Product Information Guide - Page 8

Epson Stylus Photo R1900 Series Loading Special Paper in the Single Sheet Guide You can load one sheet of these types and sizes of paper in the single sheet guide. Paper type Epson Velvet Fine Art Paper Epson Watercolor Paper Radiant White Epson UltraSmooth Fine Art Paper 250 gsm PremierArt Matte Scrapbook Photo Paper for Epson Size Letter (8.5 × 11 inches) Super B (13 × 19 inches) Super B (13 × 19 inches) Super B (13 × 19 inches) Letter (8.5 × 11 inches) 12 × 12 inches 1. Remove any paper from the sheet feeder and close the paper support. 2. Open the output tray and pull out the extensions. 6. Insert one sheet of paper, printable side up and against the right side, then slide the edge guide against the sheet, but not too tightly. Note: Load paper short edge first, no matter which way your photo faces. Check the paper package for any additional loading instructions. 7. Push the paper into the printer until it meets resistance and hold it there until the printer pulls it in slightly. Once the printer begins feeding the paper, let go of it. 3. Slide the roll paper edge guide on the back of the printer all the way to the right. 8. Open the printer cover and make sure the paper has fed all the way into the printer and is straight. The paper must feed straight so the printer can properly identify the edge of it. 4. Attach the single sheet guide by aligning the notches on its base with the slots on the back of the printer. Then hook the tabs over the top of the slot (marked with orange triangles). 5. Turn on the printer so it can load the paper correctly. If the paper is crooked or the front edge is visible, you may receive a paper jam error when you print. To avoid this, press and hold the M roll paper button for three seconds to back the paper out. Remove the paper from the printer, press the I paper button to clear the paper out error, and load the paper again. 8 - Epson Stylus Photo R1900 Series 11/07