Epson R260 Printer Basics - Page 35
Adjusting the Print Density - how to check ink levels
UPC - 010343859043
View all Epson R260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Adjusting the Print Density If ink smears on your printed CDs or DVDs, you may need to adjust the color saturation or ink density. CDs and DVDs from different manufacturers may absorb ink differently, so you may need to adjust the density for each type of disc. Follow these instructions to print a color saturation check pattern, and then make adjustments as necessary. 1. Start Epson Print CD. 2. Open the File menu and select Print. 3. Insert a test CD or DVD for printing, as described on page 28. 4. Make sure EPSON Stylus Photo R260 Series is selected, then click Print Density Confirmation Pattern. 5. Click Print. 6. After the pattern is printed, examine the print. If you need to adjust the color, open the File menu, select Print, and make the Print Color Correction setting lighter or darker as necessary. Then, repeat steps 3 through 6 (but select either Second or Third in the Print Confirmation Pattern section, depending on whether you're printing your second or third pattern on the disc). Note: You can print three density patterns on one disc. Each pattern is printed in a different location. 7. Remove the CD or DVD and let it dry for at least 24 hours. Then check the saturation levels again. Note: You can also use the Brightness and Contrast settings in Epson Print CD to adjust color saturation. For additional information, open the Help menu in Epson Print CD and select Help Topics. Printing on CDs and DVDs 35