Epson Stylus Pro 10000 User Manual - Page 121
Aligning the Print Head from the Control Panel
View all Epson Stylus Pro 10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Maintaining and Transporting the Printer | 6-5 Aligning the Print Head from the Control Panel You can use EPSON roll paper to print the alignment patterns. Two rows consisting of sets of 15 bars are printed across the width of the paper. It takes about 10 minutes to print both rows. Follow these steps to align the print head using the control panel: 1. Load roll paper that is at least 24 inches wide in the printer. 2. Press the SelecType button until HEAD ALIGNMENT MENU is displayed. 3. Press the Item button. PAPER THICK=STD appears on the display. If you're using EPSON paper, leave this setting on STD. If you're using other media, enter the thickness value of the paper in 0.1-mm increments by pressing the + or - button. 4. Press the Enter button to save the setting. ADJUST. PATT.= ALL appears on the display. 5. Press the Enter button to print both rows of alignment patterns. If you want to print a single row of alignment patterns, press the + or - button until the row number appears. Then press the Enter button. 6. Examine the first row. You see a series of patterns similar to the pattern below across the width of the paper. Determine which bar in the first Note pattern has the smallest gaps. In the example below, #8 has the smallest gaps. If bar #8 (the current alignment setting) shows the smallest gaps for both rows, the print head is aligned. Press Pause to exit head alignment mode. 6-5