Epson Stylus Pro 10000 User Manual - Page 69
Choosing Basic Print Options
View all Epson Stylus Pro 10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Printing with EPSON Drivers for Macintosh | 3-3 Note Don't select Landscape unless you want to rotate your image 90°. Note These settings override settings made through the control panel. 3. Select the type of paper you loaded in the printer from the Paper Source list. If your image is more than 62 inches long, select Roll Paper (Banner). You can also use this setting to print a series of continuous images without any "margin space" between them. 4. If you're using roll paper, you can set the following options: • Auto Rotate Saves paper if your document length is shorter than the printable width of the paper roll. Your image will be turned automatically by 90 degrees and printed crosswise. • Auto Cut Choose this option if you want the paper to be cut automatically after each page is printed. • Print Page Line Prints trim lines on the right and bottom edges of your pages. • Save Roll Paper Saves paper by not feeding the blank portion of the last page of your document. Applicable in Roll Paper (Banner) mode only. 5. Make the settings you want for Orientation, Reduce or Enlarge, and Printable Area (available when Paper Source is set to Sheet). 6. After making your settings, click OK. Choosing Basic Print Options Once you have selected your page setup options, you need to select printing options. The EPSON driver offers automatic settings that optimize print quality and speed when you're using EPSON media. You can also choose advanced settings for more control over your printer and color management options, as described on page 3-9. 3-3