Epson Stylus Pro 10000 User Manual - Page 13
Macintosh System Requirements, For IEEE 1394 connection: iMac DV, G3, or G4 series System 8.6 or
View all Epson Stylus Pro 10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Introduction | 5 EPSON also provides technical assistance 24 hours a day through the World Wide Web. You can reach EPSON Support at http://support.epson.com. At this site, you can download drivers and other files, look at product documentation, access troubleshooting information, and receive technical advice through e-mail. You can purchase ink cartridges, paper, and accessories from EPSON at (800) 873-7766, or visit the EPSON Store at www.epsonstore.com (U.S. sales only). In Canada, please call (800) 873-7766 for dealer referral. Note If you are not using Photo Printing Accelerator in your driver (see page 3-4 for details), or if you are using a software or hardware RIP, you must have a Power Macintosh G4 with 500 MHz or higher processor and 512MB RAM to keep the printer running at full engine speed. For optimum performance, we recommend the latest Macintosh system available with a FireWire connection. If you are running System 8.5.1 on an iMac, Apple recommends that you download iMac Update 1.1 from their web site. Macintosh System Requirements To use your printer in either a standalone or peer-to-peer network environment, your system should include the requirements listed below: • For USB connection: Power Macintosh® G3, G4, or iMac™ series (System 8.5.1 through 9.1; System 9.1 recommended) For IEEE 1394 connection: iMac DV, G3, or G4 series (System 8.6 or later with FireWire® Update 2.1 or later) For 10/100 BaseT Ethernet connection: iMac, G3, or G4 series (System 8.5.1 through 9.1) • 350 MHz or higher processor • 256MB of RAM • At least 50MB of free hard disk space to install the software, and at least 150MB of free hard disk space for processing files (2GB or more available hard disk space recommended) • Quad-speed (4×) or faster CD-ROM or DVD drive for installing the printer software • For USB connection: a compliant USB port and a shielded USB "AB" cable from Series A (computer) to Series B (printer), up to 6.6 ft (2 meters) long For IEEE 1394 (FireWire) connection: a compliant IEEE 1394 port and a shielded IEEE 1394 cable For network connection: the optional EpsonNet Print Server (described on page 2) and compatible cable 5