Epson Stylus Pro 10000 User Manual - Page 135
Replacing the Waste Ink System, check print see
View all Epson Stylus Pro 10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Maintaining and Transporting the Printer | 6-19 Replacing the Waste Ink System Approximately every two years of normal usage (25% duty cycle) or after 12,000 B1-size prints, you should have your authorized EPSON servicer replace the waste ink system. This is necessary to prevent damage to the print head and maintain print quality. Parts and labor for this service are not covered under the terms of the limited warranty. You can monitor the status of the waste ink system through the control panel (see page 5-4) or through the Ink Pad number displayed on the nozzle check print (see page 5-3). The printer will display the following message on the control panel when the waste ink system is almost full: MAINTENANCE REQ. 0100 You should call to schedule service at this point. When the waste ink system is at full capacity, the printer will stop and display the following message: SERVICE REQ. 00000100 6-19