Epson Stylus Pro 10000 User Manual - Page 56
Using Cut Sheet Paper, light comes on.
View all Epson Stylus Pro 10000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
2-10 | Handling Paper and Other Media Caution To avoid damaging the printer, never move the paper set lever while the Operate or Pause light is flashing. Using Cut Sheet Paper You can print on many types of cut sheet paper and other media. The printer accepts sheets ranging from letter-size (8.5 × 11 inches) to 44 × 62.2 inches. You can leave your roll paper in the printer when you print on cut sheets; make sure it is rolled up and fastened with the roll paper belt(s), as described on page 2-7. If you're using stock more than 19 mil (0.5 mm) thick, see page 2-11 for instructions. You will not be able to follow the "autoload" procedure described in this section. Before you start, make sure the printer is on and roll paper is not loaded for printing. Then follow these steps: 1. Make sure the roll paper cover is closed. 2. Press the Paper Source button until the Sheet light comes on. 3. Make sure the paper set lever is pushed all the way in, in the secured position. 4. Feed the sheet into the paper slot until it meets resistance. Make sure the right edge of the paper is straight and aligned with the scale on the roll paper cover. PRESS PAUSE BUTTON appears on the control panel display. 2-10