Epson SureLab D700 Operation Guide - Maintenance Tool - Page 11
Forced Cleaning, Diagnostic Cleaning, Power, Head Maintenance
![]() |
View all Epson SureLab D700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
SL-D700 Maintenance Tool Operation Guide Using the Maintenance Tool (Windows) The nozzle check starts. Perform cleaning if necessary. Depending on the condition of the nozzles, the time required may differ. D Check the results of Diagnostic Cleaning in the message displayed on the screen. When the message "Diagnostic cleaning completed." is displayed, cleaning is complete. When "Diagnostic cleaning is finished. Clogged nozzles detected. Perform diagnostic cleaning again. If the clogged nozzles are not cleared after performing diagnostic cleaning three times, perform [Forced Cleaning] set to [Power]." is displayed, perform Diagnostic Cleaning again. If "Auto nozzle check failed." is displayed, contact service support. If the clogged nozzles are not cleared after performing Diagnostic Cleaning three times, perform Forced Cleaning set to Power. If the nozzles are still clogged even after performing Power cleaning, contact service support. U "Forced Cleaning" on page 11 Forced Cleaning A Click Head Maintenance on the main screen. The Head Maintenance screen is displayed. 11
![](/manual_guide/products/epson-surelab-d700-operation-guide-maintenance-tool-7bed23e/11.png)