Epson SureLab D700 Operation Guide - Maintenance Tool - Page 81
Periodic Nozzle Check, Set whether or not to automatically perform a Nozzle Check.
![]() |
View all Epson SureLab D700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
SL-D700 Maintenance Tool Operation Guide Using the Maintenance Tool (Mac OS X) Periodic Nozzle Check Set whether or not to automatically perform a Nozzle Check. This should normally be enabled. Only disable this function if you are instructed to do so by a service engineer. If this is disabled, it is necessary to check the clogging status manually. A Click Periodic Nozzle Check on the main screen. The Periodic Nozzle Check screen is displayed. B Select Enable Periodic Check, and then click Set. When this is selected, a Nozzle Check is automatically performed at periodic intervals. When this is cleared, a Nozzle Check is not automatically performed. Also, you cannot execute Diagnostic Cleaning. 81
![](/manual_guide/products/epson-surelab-d700-operation-guide-maintenance-tool-7bed23e/81.png)
Periodic Nozzle Check
Set whether or not to automatically perform a Nozzle Check.
This should normally be enabled. Only disable this function if you are instructed to do so by a service engineer. If this is
disabled, it is necessary to check the clogging status manually.
A
Click
Periodic Nozzle Check
on the main screen.
The
Periodic Nozzle Check
screen is displayed.
B
Select
Enable Periodic Check
, and then click
Set
.
When this is selected, a Nozzle Check is automatically performed at periodic intervals.
When this is cleared, a Nozzle Check is not automatically performed. Also, you cannot execute Diagnostic
Cleaning.
SL-D700
Maintenance Tool Operation Guide
Using the Maintenance Tool (Mac OS X)
81