Epson SureLab D700 Operation Guide - Maintenance Tool - Page 9
SL-D700, Maintenance Tool Operation Guide, Print Check Pattern
![]() |
View all Epson SureLab D700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
SL-D700 Maintenance Tool Operation Guide Using the Maintenance Tool (Windows) A There are problems with the print outs such as stripes appearing or a variation in the colors. B Perform Diagnostic Cleaning. When the message "Diagnostic cleaning completed." is displayed -> Cleaning is complete. When the message "Diagnostic cleaning is finished. Clogged nozzles detected. Perform diagnostic cleaning again. If the clogged nozzles are not cleared after performing diagnostic cleaning three times, perform [Forced Cleaning] set to [Power]." is displayed -> Perform Diagnostic Cleaning again. If the nozzles remain clogged after repeating this procedure three times, go to the next step. C Execute Power from Forced Cleaning, and then check Print Check Pattern. When there are no problems in the check pattern print results -> Operations are complete. When there are problems in the check pattern print results -> Contact service support. 9
![](/manual_guide/products/epson-surelab-d700-operation-guide-maintenance-tool-7bed23e/9.png)