Epson TM-T20II-i Users Manual - Page 19

English Specifications Item Specification Printing method Roll paper dimensions Paper width*1 Thermal line printing 79.5 mm ± 0.5 mm {3.13" ± 0.02"} Diameter 83 mm {3.27"} maximum Inside diameter of core 12 mm {0.47"} Outside diameter of 18 mm {0.71"} core Thermal paper type NTP080-80 Interface Ethernet × 1 10BASE-T/100BASE-TX Serial × 1 D-sub 9 pin male USB (host) × 2 USB 2.0, Type A 5 V, 500 mA*2 USB (device) × 1 micro SD card*3 USB 2.0 High speed, Type B × 1 Power supply*4 Drawer kick-out × 1 DC +24 V ± 7% Current consumption (at 24 V)*5 M267A M267D AC power consumption*6 Operating*7 1.8 A 1.5 A 230 V/50 Hz: 29.4 W 115 V/60 Hz: 29.5 W Standby 230 V/50 Hz: 2.9 W 115 V/60 Hz: 2.8 W Temperature Operating 5 to 45°C {41 to 113°F} Storage -10 to 50°C {14 to 122°F} Humidity Operating 10 to 90 %RH Storage 10 to 90 %RH Overall dimensions W × D × H: 140 mm × 199 mm × 146 mm {5.51"× 7.83" × 5.75"} Mass (excluding paper and AC adapter) Approx. 1.6 kg {3.55 lb} *1: 58 mm width paper (57.5 ± 0.5 mm) is also available. For information on how to change paper width, see Technical Reference Guide. *2: 500 mA at maximum for one port. 800 mA at maximum for total of the two ports. *3: Available when the PHP function is enabled. For information on how to setup PHP environment, see TM-i Series PHP Setup Manual. Be sure to use a micro SD card with the wear leveling function. *4: Be sure to use a safety-standards-applied power source that meets the following specifications. Rated output M267A: 24 V/2.0 to 10.0 A M267D: 24 V/1.5 to 10.0 A Maximum output 240 VA or less *5: The current varies depending on the model number. Use the label on the product to identify the model number and check the current for your printer. MODELɹM267A MODELɹM267D *6: Reference data: In case of using the Epson power supply, PS-180 (Model: M159B) *7: Based on Epson operating conditions. 19