Epson TM-U675 Users Manual - Page 13

TM-U675/U675P Specifications, CAUTION, Notes on Using the MICR Reader - paper

Get Epson TM-U675 PDF manuals and user guides View all Epson TM-U675 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

English Follow the steps below: 1. Load a paper roll in the printer; turn off the power; then open the paper roll cover and turn the power back on while holding down the RELEASE button. 2. Press the RELEASE button seven times; then close the paper roll cover. The printer prints the following message on receipt paper and the SLIP light flashes. 3. Insert the cleaning sheet like a standard check. CAUTION: Be sure that the sheet is inserted with the correct side up and that it is inserted in the correct direction. Use a cleaning sheet only one time; then discard it. 4. When the sheet is ejected, press the RELEASE button, and remove the sheet from the printer. Notes on Using the MICR Reader Do not install the printer near any magnetic fields. Be especially careful where you install your display device and be sure to check the recognition rate of the MICR reader with the display device in place. Make sure that the printer is not subjected to any impact or vibration when it is performing a MICR reading. TM-U675/U675P Specifications Print method: Print font: Columns: Character size: Character sets: Print speed: Paper dimensions: 9-pin serial impact dot matrix 5 9/79 37 / 50 columns (receipt) 45 / 60 columns (slip/validation) 1.56 mm  3.1 mm / 1.24 mm 3.1 mm {0.006"  0.12" / 0.49"  0.12" 95 alphanumeric, 37 international characters 128  12 pages extended graphic characters Approximately 5.14 LPS (40 columns at 17.8 CPI) TM-U675/TM-U675P User's Manual 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
TM-U675/TM-U675P User’s Manual
11
English
Follow the steps below:
1.
Load a paper roll in the printer; turn off the power; then open
the paper roll cover and turn the power back on while holding
down the
RELEASE
button.
2.
Press the
RELEASE
button seven times; then close the paper roll
cover. The printer prints the following message on receipt
paper and the
SLIP
light flashes.
3.
Insert the cleaning sheet like a standard check.
CAUTION:
Be sure that the sheet is inserted with the correct side up and that it is
inserted in the correct direction.
Use a cleaning sheet only one time; then discard it.
4.
When the sheet is ejected, press the
RELEASE
button, and
remove the sheet from the printer.
Notes on Using the MICR Reader
Do not install the printer near any magnetic fields. Be especially
careful where you install your display device and be sure to check
the recognition rate of the MICR reader with the display device in
place.
Make sure that the printer is not subjected to any impact or
vibration when it is performing a MICR reading.
TM-U675/U675P Specifications
Print method:
9-pin serial impact dot matrix
Print font:
5
9 / 7
9
Columns:
37 / 50 columns (receipt)
45 / 60 columns (slip/validation)
Character size:
1.56 mm
3.1 mm / 1.24 mm
3.1 mm {0.006”
0.12” / 0.49”
0.12”
Character sets:
95 alphanumeric, 37 international characters
128
12 pages extended graphic characters
Print speed:
Approximately 5.14 LPS (40 columns at 17.8 CPI)
Paper dimensions: