Epson TM-U950 Users Manual - Page 7
RECEIPT FEED, JOURNAL/SLIP FEED, PRESS, If not enough paper
View all Epson TM-U950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1. Make sure the leading edge of the paper is straight. 2. Turn on the printer and open the printer cover. 3 3. Insert paper rolls on both the receipt and journal sides of the printer, as shown in illustration 3. (The journal roll is on the right in this illustration.) 4. For each roll, insert the tip of the paper into the paper inlet and push it in until it is automatically detected and fed into the printer. See illustration 4. 5. Tear off the receipt paper on the 4 cutter. If the paper was not fed far enough, press the RECEIPT FEED button to feed additional paper. 6. Insert the tip of the journal paper into the groove in the take-up spool and rotate the spool two or three times to secure the paper. See illustration 5. If not enough paper was fed, press JOURNAL/SLIP FEED 5 to feed more. 7. Install the take-up spool and close the printer cover. 8. To remove the journal paper roll, first lift the take-up spool and cut the paper. Then remove the take-up spool. See ✄ illustration 6. 6 9. For either a journal or receipt paper roll, next press the release lever (marked PRESS) on the appropriate side of the printer, pull out the paper, and remove the roll. English C✔orrect W✖rong TM-U950 User's Manual 5