Epson WF-100 User Manual - Page 129
Solving Paper Problems, Paper Feeding Problems
View all Epson WF-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
• If you are connecting the product wirelessly via EpsonNet Setup and the Wi-Fi connection icon is not lit or does not appear on the product's LCD screen, make sure your product software was installed correctly. If necessary, reinstall your software. Parent topic: Solving Network Problems Related concepts When to Uninstall Your Product Software Related tasks Printing a Network Status Sheet Related topics Wi-Fi Networking Solving Paper Problems Check these sections if you have problems using paper with your product. Paper Feeding Problems Paper Jam Problems in the Rear Paper Feed Paper Jam Problems Inside the Product Parent topic: Solving Problems Paper Feeding Problems If you have problems feeding paper, try these solutions: • Place the product on a flat surface. • If the battery is running low, connect the AC adapter. • If paper does not feed for printing, remove it. Then reload it in the rear paper feed against the right side and beneath the tab. Slide the edge guide against the edge of the paper. • If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it. • If paper jams when you print on both sides of the paper, try loading fewer sheets. • Make sure your paper meets the specifications for your product. • Make sure the paper size and paper type settings on the control panel are correct. • For best results, follow these guidelines: • Use new, smooth, high-quality paper that is not curled, creased, old, too thin, or too thick. • Load paper in the rear paper feed printable side up. 129