Epson WF-8590 Users Guide - Page 350
Condition/solution, Clear Font and Macro, Line Type, Dial Tone Detection, Save Failure Data
View all Epson WF-8590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 350 highlights
Code 104 106 107 108 109 110 111 201 202 203 204 205 206 207 208 301 401 Condition/solution Reverse printing has failed due to a lack of available memory. Clear fonts and macros from the product's memory using the Clear Font and Macro option from the Setup menu or reduce the data size of the print job. Cannot print from the computer due to access control settings. Contact your printer administrator. User authentication failed and the job has been canceled. Contact your printer administrator. Confidential job data was deleted when the product was turned off. The received fax was already deleted. The job was printed 1-sided because the loaded paper does not support 2-sided printing. Available memory is running low. Reduce the size of the print job. The product's memory is full. You can send pages individually, or print received faxes and delete them to free up memory space. The line was disconnected by the recipient's fax machine. Wait a moment, then try again. The product cannot detect a dial tone. Make sure the phone cable is connected correctly and the phone line works. If you connected the product to a PBX (Private Branch Exchange) phone line or Terminal Adapter, change the Line Type setting to PBX. If you still cannot send a fax, turn off the Dial Tone Detection setting. (Turning off the Dial Tone Detection setting may cause the product to drop the first digit of a fax number.) The recipient's fax machine is busy. Wait a moment, then try again. The recipient's fax machine does not answer. Wait a moment, then try again. The phone cable is incorrectly connected to the product's LINE and EXT ports. Connect the phone cable correctly. The phone cable is not connected. Connect the phone cable. The fax could not be sent to some of the specified recipients. Print a fax log to check which recipients failed to receive the fax. If the Save Failure Data setting is turned on, you can resend a fax from Job Monitor in the Status Menu. There is not enough storage space available to save the data in the external memory device. Clear space on the device or use a different device. 350