Epson WF-8590 Users Guide - Page 356

Product Turns Off Automatically Noise After Ink Installation Software Installation Problems Parent topic: Solving Problems Product Does Not Turn On or Off If you cannot turn the product on or off, try these solutions: • If you cannot turn on your product, make sure the power cord is securely connected and hold down the power button a little longer. • If you cannot turn off your product, hold down the power button a little longer. If you still cannot turn off your product, unplug the power cord, plug the power cord back in, then turn your product on and off again using the power button. Parent topic: Solving Setup Problems Product Turns Off Automatically If the product turns off automatically, do one of the following depending on the power saving options available for your product: • Turn off the Power Off If Inactive and Power Off If Disconnected settings under the Power Off Settings option in the System Administration menu, if available for your product. • Turn off the Power Off Timer setting in the System Administration menu, if available for your product. Parent topic: Solving Setup Problems Noise After Ink Installation If you hear noises from your product after installing ink, check the following: • The first time you install the ink cartridge, the product must charge its print head. Wait until charging finishes before you turn off the product, or it may charge improperly and use excess ink the next time you turn it on. • If the product's print head stops moving or making noise, and the charging process has not finished after approximately 5 minutes, turn off your product. Turn it back on and check to see if charging is still in progress. If it is still in progress, contact Epson for help. Parent topic: Solving Setup Problems 356