Epson WorkForce 610 Quick Guide - Page 47
Paper Feeding Problems, If paper is still jammed, gently pull it out from the output tray or sheet
UPC - 010343871878
View all Epson WorkForce 610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Paper Feeding Problems ■ If paper doesn't feed correctly, remove it from the sheet feeder. Tap the edges to align the stack of paper and flip through the stack to separate the sheets a little. Then reload the paper against the right side, and slide the left edge guide against the paper (but not too tightly). ■ Do not load too many sheets at once (see page 6). ■ Do not load paper with holes punched in it. ■ If paper has jammed: 1. Press x Start to eject the jammed paper. 2. If paper is still jammed, gently pull it out from the output tray or sheet feeder. 3. If paper is stuck inside, press the P On button to turn off the printer. Then lift the scanner, remove the jammed paper and torn pieces, close the scanner, and turn the printer back on. Problems and Solutions 47