Epson WorkForce Pro WF-C869R Users Guide - Page 261

Setting Dial Tone Detection Options On Off Dial Mode Line Type Header Receive Mode Distinctive Ring Tone Pulse PSTN PBX Fax Header Your Phone Number Manual Auto All Single Double Triple Double&Triple Description Automatically dials the number you enter for faxing when the product detects a dial tone. Turns off automatic dial tone detection, which may be necessary if the product is connected to a PBX (Private Branch Exchange) or a TA (Terminal Adapter). However, turning this setting off may cause the product to drop the first digit of a fax number. Selects a tone dialing system and assigns each number a tone during dialing. Selects a pulse dialing system and assigns each number a series of pulses during dialing. You can temporarily switch to Tone by pressing * during dialing. Selects a standard phone line (Public Switched Telephone Network). Selects Private Branch Exchange, the type of phone line used in office environments where an access code such as 9 must be used to call an outside line. Select to enter the header information and your phone number for inclusion on outgoing faxes. Lets you confirm whether an incoming fax should be printed; a telephone must be connected to the product Automatically receives and prints faxes. If you are using a Distinctive Ring Service on your phone line, your telephone company can assign two or more phone numbers to the same line and assign different ring patterns to each. If you use this service, select the number of rings for your fax number so your product can receive faxes on the correct number of rings. Select All for phones lines that do not use this service. 261