Epson WorkForce Pro WF-C869R Users Guide - Page 365

LCD screen message Condition/solution Maintenance rollers in XX is nearing the end of its service life. . The maintenance rollers need to be replaced periodically for optimal performance. (Paper may not feed correctly from the paper cassette when the maintenance roller is near the end of its service life.) Maintenance rollers in XX is at the Replace the maintenance rollers. end of its service life. Replace it and reset the maintenance roller counter You need to replace ink supply unit(s). Replace the indicated ink packs. Paper Setup Auto Display is set to Off. Some features such as paper size and type settings may be unavailable. For details, see your documentation. AirPrint is not available when the Paper Setup Auto Display setting is disabled. Change Paper Setup Auto Display to On. No dial tone detected. Make sure the phone cable is connected correctly and the phone line works. If you connected the product to a PBX (Private Branch Exchange) phone line or Terminal Adapter, change the Line Type setting to PBX. If you still cannot send a fax, turn off the Dial Tone Detection setting. (Turning off the Dial Tone Detection setting may cause the product to drop the first digit of a fax number.) Failed to receive faxes because the Press the Job/Status button and select Printer Status and fax data capacity is full. Touch the resolve any printer errors that prevented faxes from printing. Job/Status at the bottom of the Home Make sure the product is connected to a computer or that a USB Screen for details. device is connected to the product. Combination of the IP address and There is a problem with the network connection to your product. the subnet mask is invalid. Set up your product on the network again. Update the root certificate to use cloud services. Access the Web Config utility and update the cloud service root certificate. 365