Epson r-d1 Product Support Bulletin(s) - Page 5
Perform the firmware upgrade - r d1 manual
 |
View all Epson r-d1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
2. Insert the memory card containing the firmware data described above into the RD1 memory card slot. (See the R-D1 manual for more information on the memory card insertion) Perform the firmware upgrade 1. With the R-D1 turned off, simultaneously press and hold the MENU and the USER button then turn ON the R-D1 power switch. button Warning! Do not remove the memory card, or turn off the power switch during the firmware upgrade process! This will cause an upgrade failure, and may render the camera unusable. 2. When the screen below is displayed, turn the JOG dial (see image above) until "OK" is highlighted, then press the ENTER button Page 5 of 9 PSB.2006.06.001
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10
 |
 |
Page
5 of 9
PSB.2006.06.001
2. Insert the memory card containing the firmware data described above into the R-
D1 memory card slot. (See the R-D1 manual for more information on the memory
card insertion)
Perform the firmware upgrade
1. With the R-D1 turned off, simultaneously press and hold the MENU
button
and the USER button
then turn ON the R-D1 power switch.
Warning!
Do not remove the memory card, or turn off the power switch during the
firmware upgrade process! This will cause an upgrade failure, and may render
the camera unusable.
2. When the screen below is displayed, turn the JOG dial (see image above) until
“OK” is highlighted, then press the ENTER button