Fluke 124 FE 123 & 124 Users Manual - Page 54
Replacing and Disposing of the, Rechargeable Battery Pack, To avoid electrical shock, remove the test - service manual
View all Fluke 124 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Fluke 123/124 Users Manual Replacing and Disposing of the Rechargeable Battery Pack Warning To avoid electrical shock, remove the test leads and probes before replacing the battery pack. Note This instrument contains Ni-Cd or Ni-MH batteries. Do not dispose of this battery pack with other solid waste. Used batteries should be disposed of by a qualified recycler or hazardous materials handler. Contact your authorized FLUKE Service Center for recycling information. To replace the battery pack, do the following: (See Figure 2-2.) 1. Disconnect the test leads and probes both at the source and at the test tool. 2. Power the test tool with the Power Adapter.This ensures information stored in memories will not be lost. 3. Locate the battery access cover on the bottom rear. Loosen the screw with a flat-blade screwdriver. 46 Figure 2-2. Replacing the Battery Pack 4. Lift the battery access cover away from the test tool. 5. Take the battery pack out of the battery compartment. 6. Remove the battery plug from the connector. 7. Install a new battery pack.