Fluke 744 Fluke 744 Users Manual - Page 75
Simultaneous Measure/Source, MEASURE/SOURCE mode are for use in calibrating
View all Fluke 744 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Simultaneous Measure/Source Use the MEASURE/SOURCE mode to calibrate or emulate a process instrument. Press M so that a split screen display appears as shown below. gj42s.eps Documenting Process Calibrator Simultaneous Measure/Source Table 7 shows the functions you can use simultaneously when Loop Power is disabled. Table 8 shows the functions you can use simultaneously when Loop Power is enabled. You can use the Step or Auto Step features to adjust the output in MEASURE/SOURCE mode, or you can use the calibration routine provided when you press the As Found softkey. The following two softkeys displayed in MEASURE/SOURCE mode are for use in calibrating a process instrument. • As Found, which lets you set up a calibration routine to obtain and record as found data. • Auto Step, which lets you set up the calibrator for auto-stepping, as previously described. Instructions for calibrating a process instrument follow. 65