Foscam FI9853EP USER MANUAL - Page 69
UPnP always failed, 2 Default Parameters, 3 Specification
View all Foscam FI9853EP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
www.foscam.us 7.1.8 UPnP always failed UPnP only contains port forwarding in our recent software. Sometimes, it may be failed to do port forwarding automatically because of firewall or anti-virus software. It also has much relation with router's security settings. So we recommend you do port forwarding manually. You can view your camera in internet successfully after you do port forwarding manually in your router. 7.2 Default Parameters Default network Parameters IP address: obtain dynamically Subnet mask: obtain dynamically Gateway: obtain dynamically DDNS: Embedded FOSCAM DDNS Service Username and password Default username is admin with a blank password 7.3 Specification ITEMS Image Sensor Lens Video Sensor Display Resolution Min. Illumination Lens Type focal length Aperture Angle of View Image Compression Image Frame Rate Resolution Stream Image adjustment Flip image Infrared mode Night visibility Ethernet FI9853EP High Definition Color CMOS Sensor 1280 x 720 (1.0M Pixels) 0 Lux (With IR Illuminator) Glass Lens f:2.8mm F1.2 70° H.264 30fps(60Hz), 25fps(50Hz), downward adjustable 720P(1280 x 720), VGA(640 x 480), QVGA(320 x 240) dual stream The hue, brightness, contrast, saturation, sharpness are adjustable flip and mirror Automatic or manual With 1 Infrared Lamp Array, Night Vision Range up to 20m One 10/100Mbps RJ45 port Foscam Digital Technologies LLC 68 Telephone: 1-800-930-0949