Foscam FI9853EP USER MANUAL - Page 9
Access the Camera in WAN, 2.1 Static IP Addresses - default ip
View all Foscam FI9853EP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
www.foscam.us Double click the IP address of the camera; your default browser will open to the camera login page. (2) Https:// LAN IP + Https Port no. The default Https port no. is 443. You can use the url to access the camera: https:// LAN IP + HTTPS port. Go to Settings - Network - Port panel , you can see and change the https port no. Figure 2.2 2.2 Access the Camera in WAN 2.2.1 Static IP Addresses Users who have static IP addresses do not need to set DDNS service settings for remote access. When you have finished connecting the camera using the LAN IP address and port forwarding, you can access the camera directly from the Internet using the WAN IP address and port number. How to Obtain the WAN IP address from a public website To obtain your WAN IP address, enter the following URL in your browser: http://www.whatismyip.com.The webpage at this address will show you the current WAN IP. Figure 2.3 Access your IP Camera from the Internet You can access the IP Camera from the Internet (remote access). Enter the WAN IP address and port number in your standard browser. For example, you would enter http:// 183.37.28.254:85 NOTE: Make sure port forwarding is successful. You can do port forwarding two ways. Foscam Digital Technologies LLC 8 Telephone: 1-800-930-0949