Foxconn 560A multilateral manual. - Page 34

Chapter 2 BIOS Description when "Delay 4 sec", the power will be off after the power button is pressed for more than 4 seconds. 6.4 PWRON After PWR-Fail This item is used to set what action the PC will take with the power supply when it resumes after a sudden power failure. The available options are: Off (remain in turn off status), On (auto power on) and Former-Sts (resume with the previ-ous status). 6.5 Resume by PCI card This item is used to set the Resume by PCI card. 6.6 USB Resume from S3 This item is used to enable or disable USB Resume from S3 function. 6.7 USB CSC Resume from S3 W hen enabled, the computer will wake from S3 if a connection status change is detected i.e. plugging or unplugging a USB device. 6.8 Resume by Alarm This item is used to set the timing of the start-up function. In order to use this function, the start-up password function must be canceled. Also, the PC power source must not be turned off. 6.9 Date of Month Alarm W hen the Resume by Alarm set as "Enabled", this item will be modified. It is used to set the timing for the start-up date. 6.10 Time (hh:mm:ss) Alarm W hen the Resume by Alarm set as "Enabled", this item will be modified. It is used to set the timing for the start-up time. 6.11 HPET Support This item allows you to enable or disable High Precision Event Timer function. If you use windows vista processing system, we intensively suggest that you set this option to "Enabled". 6.12 Power On By Button W hen "Enabled", you can press the button to turn on the system. 6.13 Power On By Mouse This item is used to enable or disable to turn on the system by mouse. 6.14 Power On By Keyboard Allows you to turn on the system by keyboard. 6.15 KB Power ON Password W hen "Power On By Keyboard" set to "Password", you can enter password to turn on the system when KB power is using. 6.16 Hot Key Power ON When "Power On By Keyboard" set to "Hot key", you can use the item to set the hot key combination to turn on the system. 29