Foxconn 720AL English Manual. - Page 105
Setting Up a Non-Bootable RAID Array
View all Foxconn 720AL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
5-5 Setting Up a Non-Bootable RAID Array This section assumes the following setup : ■ Boot Disk with Windows XP installed : One hard disk HDS728080PLAT20 (80GB) is connected to the IDE channel, and set to Master. ■ A Mirrored RAID Array Disk : Two SATA hard disks are configured as a mirrored RAID1 array, they are : Hitachi HDT725025VLA, (232.88GB) connected to SATA port2 of the motherboard. Segate ST3320620AS, (298.09GB) connected to SATA port4. ■ A SATA DVD Drive : A DVD drive connected to SATA port1. WARNING! To achieve the best performance and reliability, we highly recommend you using the hard disks with the same brand, size and model number. Though we are using different brand of hard disks as an example here, the purpose is only for easy understanding. 1. Reboot your system, and go to "MCP SATA Mode" menu. Enable the RAID function together with the SATA ports which have the hard disks and DVD drive connected. Press [F10] to save the settings and reboot. Phoenix - AwardBIOS CMOS Setup Utility MCP SATA Mode SATA Operation Mode SATA Pri-Master RAID SATA Pri-Slave RAID SATA Sec-Master RAID SATA Sec-Slave RAID [RAID] Item Help [Enabled] [Enabled] Menu Level ► [Enabled] [Enabled] 5 Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F7:Optimized Defaults 98