Foxconn 720AL English Manual. - Page 40
MCP SATA Mode
View all Foxconn 720AL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
MCP SATA Mode Phoenix - AwardBIOS CMOS Setup Utility MCP SATA Mode SATA Operation Mode x SATA Pri-Master RAID x SATA Pri-Slave RAID x SATA Sec-Master RAID x SATA Sec-Slave RAID [IDE] Item Help Disabled Disabled Menu Level ► Disabled Disabled 3 Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults ► SATA Operation Mode This item is used to set the operating mode of your SATA ports. The available options are: [IDE] - This configures the SATA ports to support legacy PATA mode or SATA mode. [AHCI] - The Advanced Host Controller Interface (AHCI) specification describes the register level interface for a Host Controller for Serial ATA. The specification includes a description of the hardware/software interface between system software and the host controller hardware. AHCI provides more advanced features including SATA features, but some SATA drives may not support AHCI, unless they are labeled with AHCI support in its specification. If your motherboard supporting AHCI, and you have a SATA device, which also supports AHCI, then you can select IDE option to have fair performance (only PATA, SATA level), or you can select AHCI to get its best performance. WARNING! With your motherboard and SATA hard disk both supporting AHCI, you had better set this BIOS setting to AHCI, then install your Operating System (such as Windows XP). Later, if you ever change this BIOS setting to IDE, OS still can run. But if you at the first time set this setting to IDE, then install the Operating System. Later, if you change this BIOS setting to AHCI, this operating system can not run. [RAID] - When you enable RAID, it means all your SATA drives must also support AHCI. [Linux AHCI] - For advanced Linux system if it supports AHCI, then you can select this option. ► SATA Pri-Master RAID / SATA Pri-Slave RAID / SATA Sec-Master RAID / SATA Sec-Slave RAID These items are valid only when "SATA Operation Mode" is set to RAID. They are used to enable or disable the RAID function of each SATA port on the motherboard. The relationships between RAID settings and SATA ports on the motherboard are : SATA Pri-Master RAID is the SATA port 1 of the motherboard. 33